The ESScanLab positioning platform is designed to compliment most manual and semi-automated scanning systems. The platform enables the operator to confidently position and scan most test pieces with superior accuracy, repeatability and speed.
- Highly adaptable for many types of scanning from flat plate to pipe
- Excellent for use in the lab or as a training tool
- Integrates with other Eclipse components
Accessories
- Pipe ID Scanning System for UCPS-1
- Linear Guide Scanning System Kit, for UCPS-1
- Pipe Encoder System, for UCPS-1
- Pipe Encoder System, for UCPS-1
 |
|
 |
 |
 |
 |
| USPS Base System Package |
UCPS Shown Clamping Curved Angled Part |
Clamping Angled Part |
Clamping Flat Part with Optional MPE Taxi Encoder |
Linear Guide Scanning System Kit |
Pipe ID Scanning and Encoding |
|
Part Number |
Description |
|
|
| UCPS-1 |
Universal Component Positioning System, Set
A set of positioning, clamping and spacing elements that mount to a positioning board tapped 1/4-20 on a 1” spaced grid.
A variety of flat, angled and pipe samples can be securely positioned and clamped in place to allow accurate scanning.
Includes the following elements as standard equipment:
| 1x |
Positioning board 20” x 20” (510 x 510 mm) |
| 22x |
Positioning pillars
(2) 6” (150 mm); (4) - 4” (100 mm)
(8) 2” (50 mm); (8) - 1” (25 mm) |
| 6x |
Positioning blocks with removable rollers |
| 8x |
Holding clamps with thumb screws
(4) - Large
(4) - Small |
| 32x |
Spacer Blocks |
| 8x |
Holding clamps with thumb screws
(8 each) - 1/2”, 3/8”, 1/4”, 1/8” |
All necessary fastening hardware. |
 |
|
| UCPS-TXPA-K |
Universal Component Positioning System, with MPE-Taxi PA, Kit
The above UCPS-1 system set packaged with the TXPA rolling MPE-Taxi PA encoder system for wedges and transducers.
Includes the following elements as standard equipment:
| 1x |
UCPS-1 Universal Component Positioning System |
| 1x |
TXPA MPE-Taxi PA Encoder System
(Wedges and probes not included.) |
|
 |
|
| UCP-OLG-K |
Linear Guide Scanning System Kit
for UCPS-1
Encoded, linear scanning system that mounts on guide rails.
Guide rails hold the scanning platform and encoder in position for smooth accurate scanning.
Includes the following elements as standard equipment:
| 1x |
Linear Guide Rail, 20" Long |
| 1x |
SASDP100 platform with Standard Link Arm
Set |
| 2x |
SAT Encoder |
(UCPS-1, wedges and probes not included.)
For use with the UCPS-1 system only |
 |
|
| UCP-OPE |
Pipe Encoder System for UCPS-1
Allows encoding of pipe rotation while scanning. End rollers hold a pipe segment in place and allow rotation.
Recommended for pipe sizes:
OD = min. 2 in., max.14 in. nominal
Length = min. 6 in. (150 mm), max. 16 in. (406 mm)
Includes the following elements as standard equipment:
| 1x |
Pipe encoder block with Olympus "Mini-Wheel"
encoder |
| 2x |
Adjustable end rollers. |
(UCPS-1, wedges and probes not included.) |
 |
|
UCP-OPS
|
Pipe ID Scanning System for UCPS-1
Permits accurate ID scanning and encoding of pipe. End rollers hold a pipe segment in place and allow rotation. Allows the use of various profiled PA and TOFD wedges.
Recommended for pipe sizes:
OD = max.14 in. nominal; ID min. 8.25 in.
Length = min. 6 in. (150 mm), max. 16 in. (406 mm)
Includes the following elements as standard equipment:
| 1x |
Dual downslide rail scanner system |
| 1x |
UCP-OPE Pipe encoder block with encoder |
| 2x |
Adjustable end rollers |
(UCPS-1, wedges and probes not included.) |
 |
|
| UCP-OTx |
Couplant Recovery Trays for UCPS-1
Permits the use of recycling pumps for couplant.
The UCPS-1 system and other optional accessories fit inside the tray to prevent spillage of couplant materials.
UCP-OTS Stainless steel couplant recovery tray.
Size: 29” x 24” x 5” (L x W x H)
(737 x 610 x 127 mm)
UCP-OTP Plastic couplant recovery tray.
Size: 26” x 22” x 4” (L x W x H)
(660 x 559 x 100 mm) |
 |
